Energy Spark 2400 VA 8 Hour Battery solution

Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)

R8,399.00 R7,999.00

2 in stock



  • Are you in the dark during load shedding?
  • Does your favourite program stop recording on your PVR?
  • Do you need to catch up work on your computer?
  • Does your phone run flat when you need it the most?

You need an inverter system. See below Frequently Asked Questions on how they work:

Q) What is an inverter system and what does it do do?
It is an inverter unit coupled with a battery which provides power when there is load shedding. It keeps its battery charged when there is Eskom power. As soon as Eskom power cuts, the system instantly transfers over to battery power so you can keep your lights, TV, computers, chargers and wifi running during load shedding

Q) Is it easy to connect up? Do I have to fiddle with electronics?
It is super easy The system is plug and play.
The inverter has a regular 3 pin plug that goes into the wall. You then have a 3 way multiplug on the inverter that allows you to connect any appliance you want. Keep the appliances connected at all times, the inverter will automatically switch to battery as soon as it detects Eskom power is down.

Q) How much backup time will I have on the unit before normal Eskom power come back on to recharge the battery?
Assume a computer, TV, and desk lamp are connected to the inverter:
This unit will last 4-6 hours

Only want a lamp, wifi router and laptop connected to the inverter:
This unit will last 10-12 hours

Q) What appliances can I run on the inverter system?
Our plug and play systems will run any appliance that has low power usage and does not have a motor. So you can run TVs, computers, wifi, lights, chargers, etc.
Fridges, fans, heaters are not recommended to be connected to inverters. For those items, we can suggest a more specialised system – please click “contact us” and let us know your requirements.

Q) Can I connect the inverter to my house’s DB (electric) board so that my whole house is powered when Eskom does load shedding?
Sure you can – It does come more expensive than the plug and play solution, but please feel free to “contact us” we will pop through a customized quote.

Q) What is the warranty/guarantee?
The entire system comes with a full 1 year warranty.

Kit Includes:

1x 2400VA, 1440W, 24V DC-AC Inverter UPS (20A Charger)
2 x 102Ah 12V Batteries
Steel Battery Case


The batteries in this unit are designed for backup use only – not for daily SOLAR OFF-GRID charging/discarging

*NEW UNIT – quieter fan, fan turns off when batteries are fully charged.

*Owing to the weight of this item , there will be an additional R395 courier charge

All products offer the following:

– Simple operation
– Fully automatic
– Uninterrupted power (UPS)
– All-in-one cabinet
– 500W Pure Sine Wave output
– 3 stage 15A battery charger
– Intelligent CPU control
– Automatic Voltage Regulation
– LCD Information display: battery charge, input/output voltage
– Re-settable overload protection
– Low battery/overload warning
– 2 x peak surge capacity
– Portable: on wheels
– No exposed wiring
– Lockable battery compartment
– Long run time
– Fan cooling
– 12 Months warranty

The  battery compartment takes one 100Ah 12V battery.
DEEP CYCLE batteries only.
Not car batteries.
Battery installation is straightforward with all instructions and cables supplied.

We supply high performance 12V 100Ah GEL batteries for EnergySpark.
GEL batteries cost more than other deep cycle batteries but have a much longer cycle life.
Alternatively, you can source and fit any other type of deep cycle battery.

1x 100AH 12V GEL battery would run a modern 46″ flat screen LCD TV (100W), DSTV decoder (50W), laptop (50W) and 20W low energy lamp for 3 – 3 1/2 hours.

– Rated Power: 500W
– Peak Surge: 1000W
– Battery: Can use Deep Cycle Lead Acid Wet Cell, AGM or GEL battery
– Battery Compartment: Space for 1 x 12V battery up to 100Ah
– Charging Mode: 3 Stage – Mains (15A)

– Input Voltage: 145-275VAC
– Input Frequency: 50Hz
– Output Voltage: 220VAC
– Short Circuit: Breaker

– Output Voltage: 220VAC plus minus 5%
– Output Frequency: 50 plus minus 1%Hz (auto detection)
– Output Wave Form: Pure Sine Wave

– Transfer Time: Typical 2-6ms
– Overload: 110% shut down within 60sec. 120% shut down within 5sec.
– Short Circuit: 20ms automatic shut down
– Protection: Discharge, overcharge and overload protection

– LCD Display: Voltage input/output. Battery status. Overload
– Dimensions: 45cm x 45cm x 25cm
– Operating Environment: 0 Degrees Celsius – 40 Degrees Celsius. Humidity 20% – 90% non-condensing
– Noise Level: Less than 40db

1 review for Energy Spark 2400 VA 8 Hour Battery solution

  1. Rated 5 out of 5


    Very handy and easy to use when plugged in!

Add a review

Your email address will not be published. Required fields are marked *


Special category of products